Reasons For Hard Candy Failures | LorAnn Oils (2024)

Why is my hard candy grainy and not smooth?

The problem is that crystals of sugar were re-introduced into the liquid candy. This will cause your candy to crystallize and become grainy. To prevent this, (stove-top method only) wipe down the inner sides of your pan a few times with a wet pastry brush while your candy is boiling. An alternate method is to place a lid on the pan for about 3 minutes at the beginning of boiling. The idea is that condensed water, trapped by the lid will wash-down the sides of the pan.When making hard candy using the microwave method, always use a clean spoon to stir the candy after it has been cooked.

Another tip is to not add too much citric acid, as this can cause the candy to break down (and become grainy). Generally, ¼ teaspoon of citric acid is all that is needed per pound of candy.

Reasons For Hard Candy Failures | LorAnn Oils (2024)

FAQs

Reasons For Hard Candy Failures | LorAnn Oils? ›

The simple answer is that there is too much moisture in your candy. One or more factors could be contributing to this problem. In hard candy making

candy making
Candy making or candymaking is the preparation and cookery of candies and sugar confections. Candy making includes the preparation of many various candies, such as hard candies, jelly beans, gumdrops, taffy, liquorice, cotton candy, chocolates and chocolate truffles, dragées, fudge, caramel candy, and toffee.
https://en.wikipedia.org › wiki › Candy_making
, it is important to cook all the water out of the sugar/corn syrup/water mixture.

Why is my homemade hard candy not hardening? ›

Always make candy on a cool, dry day. Because candy is made from sugar, and it pulls in moisture from the air, rain and humidity, the cooking time can increase substantially. It also may never set up at all -- the candy will absorb water from the air and turn into syrup.

How to fix sticky hard candy? ›

Humidity is the enemy of hard candy. It will turn it into hard, sticky, goo. I'd try sealing a few pieces in an air-tight container along with some dry rice (or better, silica gel packets) and see if that works better. Instead of powdered sugar, try dusting the candies with a tiny bit of cornstarch.

What dissolves hard candy? ›

Hard candy is often made primarily of sugar, corn syrup and other substances that dissolve easily in water. Like the saliva in your mouth, the water in the glass allowed them to dissolve. Adding heat made this process easier and faster.

How do you get to hard-crack without burning it? ›

Hard-Crack Stage

Drop a little of the molten syrup in cold water and it will form hard, brittle threads that break when bent. CAUTION: To avoid burns, allow the syrup to cool in the cold water for a few moments before touching it! Toffee, nut brittles, and lollipops are all cooked to the hard-crack stage.

What does cream of tartar do to hard candy? ›

Adding cream of tartar when you're making candy helps prevent the creation of sugar crystals. That's why lots of icing, syrup or candy recipes call for it: it makes it so the end product doesn't have large crunchy sugar capsules.

What does corn syrup do in hard candy? ›

Provides Smooth Texture: Corn syrup helps to create a smooth and glossy texture in candies, ensuring that they are not grainy or gritty.

When to add citric acid to hard candy? ›

Typically, a hard candy mixture includes sugar, water, and corn syrup. Once you have your basic mixture ready, and just before it reaches the hard-crack stage (about 300°F), it's time to add the citric acid.

How to remelt hard candy? ›

Take this project one step further with our idea list below.
  1. Materials:
  2. Step 1: Gather assorted hard candies. ...
  3. Step 2: Arrange the hard candy onto a parchment-covered baking sheet. ...
  4. Step 3: Place the baking sheet in a 300°F oven for 8 minutes.
  5. Step 4: Remove the candy from the oven as soon as it melts.

How do you keep candy from drying out? ›

Most candies will keep 2 to 3 weeks (if not longer) if stored tightly covered in a cool, dry place or in the refrigerator. It's best to avoid storing different types of candy together in the same container because hard candies will become soft and sticky, and soft candies will dry out.

Why won't candy canes dissolve in oil? ›

The alcohol molecules can't attract the coloring and sugar molecules as well as the water so the candy coating doesn't dissolve well in alcohol. The oil molecules have no positive and negative areas. They don't attract the coloring or sugar molecules so the candy coating doesn't dissolve at all in oil.

What is the white stuff on hard candy? ›

This is crystallization and it is sometime happens with hard candies. Crystallization can happen from storage conditions or other factors. There is very low moisture content in hard candy, which prevents mold from growing.

Does hard candy get bad? ›

Hard candy like Jolly Ranchers, lollipops and other individually wrapped candies can essentially last forever if they're stored right and kept away from moisture. Dark chocolate can last one to two years in a cool, dark, dry place. Milk and white chocolate will last up to 10 months.

Why is my homemade hard candy sticky? ›

Why is my hard candy soft and sticky? The simple answer is that there is too much moisture in your candy. One or more factors could be contributing to this problem. In hard candy making, it is important to cook all the water out of the sugar/corn syrup/water mixture.

How to keep homemade hard candy from sticking together? ›

If the candy cools too quickly, set it on a saucepan over hot water to soften it, but if it gets sticky, return at once to the work counter. Toss in a small amount of powdered sugar to keep from sticking together. Repeat with the second pan of candy.

What is the hard crack sugar test? ›

6. Hard-crack stage (300 degrees Fahrenheit and above): A small amount of syrup added to cold water makes a loud cracking noise and separates into brittle threads. The hard-crack stage is for toffee and hard candies like lollipops. Above 330 degrees Fahrenheit, the sugar begins to caramelize and brown.

How do you soften hard sugar candy? ›

To speed that process along, leave the candy in a loosely covered container with a damp paper towel. If the candy is not wrapped, place a double sheet of plastic wrap between the damp towel and the candy. Change the damp towel every two to three days. It will still probably take a month or so for the candy to soften.

How do you know when hard candy is done? ›

If the candy forms a firm but not hard ball, it is in the firm ball stage. The temperature of this stage is between 242—248°F. Caramels are cooked to the firm ball stage. If the candy forms thick threads when it drips from the spoon, it is in the hard ball stage or 250°—265°F.

How long does it take to boil candy to hard crack? ›

Continue boiling, uncovered, not stirring the mixture but shaking the saucepan occasionally to distribute the heat as the mixture turns amber in about 9 minutes, then darker amber as it registers 305 degrees on the thermometer (hard-crack stage ), about 3 minutes longer.

Top Articles
Latest Posts
Article information

Author: Cheryll Lueilwitz

Last Updated:

Views: 6078

Rating: 4.3 / 5 (54 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Cheryll Lueilwitz

Birthday: 1997-12-23

Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

Phone: +494124489301

Job: Marketing Representative

Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.