If I keep old hub password on new hub, will everything work as previously? (2024)

FAQs

Can I use my old password on my new router? ›

Reusing your old network name and password can certainly help speed up the process of setting up a new router but that doesn't mean you should always go this route. Sometimes a new SSID and password really are needed.

Updating your router password is essential for safeguarding your internet connection and connected devices. Just like changing the lock on your front door, it ensures that only authorized individuals can access your network.

All you need to do is follow the setup instructions for your new router, plug in the same Wi-Fi network name in the SSID slot, and set the password to the same one you previously used with all your devices. If you use the same encryption protocol as you did before, everything should go smoothly.

The Wi-Fi password and the admin password to access the user interface pages are two different passwords unless you set them up the same. The default Wi-Fi password is printed on the label plate on the back of your device.

It's good practice to change the default password used to "manage" your home broadband router or hub, to ensure distant cyber criminals cannot change its settings and gain remote access to your home network.

Complete the setting

You may then have to restart your devices and modem for the changes to take effect – once they do, try logging into your WiFi again with the new password!

Option 1: Change Your Wi-Fi Password

The easiest, most secure method is merely changing your Wi-Fi network's password on your router. This will forcibly disconnect all devices from your Wi-Fi network—even your own. You'll have to reconnect to the Wi-Fi network by entering the new password on all your devices.

The router will take a few moments to process the change, at which point any devices currently connected would be disconnected. After your settings are changed, you can connect to your wireless network using your new password.

Connect the two routers using an Ethernet cable. If both routers are wireless and will support a subnetwork, set the first router to channel 1 or 6 and the second to channel 11. Alternatively, set up the new router as a switch or access point by connecting the routers and updating the IP configuration.

Welcome to the community! You ask an awesome question. Yes, you should be able to use your existing WiFi network name and password once you have set up the new purchased modem using the default information (follow manufacture instructions). This can certainly make your life easier.

Can I just unplug my old router and plug in a new one? ›

Unplug your old router. (If your old router is combined with your modem, you will need to go into its settings to disable the Wi-Fi network there.) All your devices should now automatically connect to your new router using the same network name and password. Verify your devices are working properly.

Yes, it will disconnect all currently authenticated devices, due to them using the old password to connect.

Know When To Change Your Password

A safe interval between changing your WiFi password is once every three months (which is also a good time to make changes to any passwords for your other sensitive technological devices).

Check the modem sticker

You can find your wireless network information printed on the sticker, which should be attacked to the back or bottom of your modem. Look for the SSID (WiFi network name) and security key (WiFi password). Some modems may have two SSIDs, one for 5 GHz and one for 2.4 GHz.

If your router is still using the default username and password, it should be easy to find. Modern Wi-Fi routers --- and the combined router/modem units offered by many Internet service providers --- come with a default Wi-Fi network name and password. Each router has its own default password, which is often random.

Unplug your old router. (If your old router is combined with your modem, you will need to go into its settings to disable the Wi-Fi network there.) All your devices should now automatically connect to your new router using the same network name and password. Verify your devices are working properly.

If you've changed the login in the past and since forgot it, or received a second hand router and the previous owner didn't reset it, you'll need to press and hold the Reset button on the router for about 30 seconds. This will reset the settings to default, allowing you to log in with the default username and password.