Historic Kentucky House Plans: The T-Plan (2024)

I enjoy words – and the field of architectural history provides a plethora of interesting terminology and vocabulary to tickle my fancy. Although there are some terms that are set in stone (the classical order of columns, for example), there are so many regional variations – not the least being house types, forms, and plans. If I mention a “T-plan house” to someone not familiar with Kentucky architecture and nomenclature, I may get a very puzzled look in return. For all of the confusion about what to call this type of house, it is very common in our towns and countryside.

A 1.5 story T-plan in rural Franklin County, Kentucky.

A T-plan refers to a dwelling that in plan (if you were to look down on it from above) looks like the letter “T” set on its side, with the cross bar of the T being a gable fronted wing. There is almost always a porch joining the two wings of the house, and entry into the dwelling is from that porch – sometimes with one entry door, sometimes with two. And to make matters more confusing – T-plans come in a variety of house plans.

A late-19th century brick T-plan in Mt. Sterling, Kentucky.

T-plan houses can be built in any material, and range from one story in height to 2.5 stories. In Kentucky, the house type developed after the Civil War, and appears to have trickled into urban areas from surrounding farmland.

The typical plan of a rural T-plan, or any T-plan with a large enough lot to accommodate a central passage.

The rural T-plan (above) is essentially a variation on the central passage plan (see below), with one of therooms located along the central hall moved forward, resulting in an irregular facade. This allowed the rooms in the ell to be accessed by the central passage.

Central passage plan, drawn by William J. Macintire.

The rural T-plan often usually had an ell, and over the years, might develop a rambling footprint, with enclosed porches, and open porches, and various additions for kitchens and bathrooms and the like. Many T-plans built in the last quarter of the 19th century feature polygonal bay windows on the facade, and ornamentation like brackets at the cornice, and porches with spindles and decorative “gingerbread.”

A rural T-plan farmhouse, Bath County, Kentucky.

A circa 1893 rural T-plan in Casey County, Kentucky.

I’m not sure how the type developed and changed over time, but what is clear is that many urban T-plan houses did away with hallway or central passage.

A plan of an urban T-plan, drawn by Kris Nonn of the North Limestone Community Development Corporation (NoLi CDC).

These T-plan dwellings instead have the two front rooms (one projecting in front of the other) side-by-side. This was likely an adaptation to narrow city lots.

The urban T-plan captured in the above plan. Image courtesy of Kris Nonn.

Urban T-plans present the “T” shape, but more often than not, are smaller than their rural counterparts.

A T-plan in Lexington, Kentucky.

Room function varies in the T-plan houses that do not incorporate a central hall. Often, an exterior door provides access to both of the front rooms.

A T-plan with two entry doors (marked by white arrows). Lexington, Kentucky.

This allowed one of the front rooms to be used as a “public” space, or living room, while the other front room could be utilized as a bedroom.

A T-plan with the two front entry doors, plus another door on the side at the rear of the house (and a partially enclosed porch). Paintsville, Johnson County, Kentucky.

T-plan houses were popular not just in Kentucky, but in most places with substantial late 19th and early 20th century residential development. In Washington state, the type is called an “upright-and-wing.” North Carolinians refer to the type as a “gable and wing.”

A small rural T-plan in Crittenden County, Kentucky.

The T-plan persisted in popularity from the late 19th century well into the 20th century. I’ve surveyed examples from the 1940s! No matter what name it goes by, the key to recognizing the type is looking for that projecting front gable on the facade. Often, you’ll also be treated to a profusion of chimneys, differing roof lines, and multiple porches. The T-plan is one of my favorite house types in Kentucky, because of the myriad of ways in which the form is interpreted and constructed – that’s the beauty and magic of vernacular architecture.

Historic Kentucky House Plans: The T-Plan (2024)

FAQs

Why are house plans so expensive? ›

Custom home plans are generally more expensive, since they require you to pay a designer for the time needed to create a unique set of blue prints. If you're looking for affordable house plans, it's best to buy a set that has already been created. Stock home plans aren't necessarily plain or boring.

What is the upright and wing house plan? ›

Upright and Wing houses were laid out in either an L-plan or T-plan. The ell usually has bedrooms and the kitchen while the wing holds a parlor, staircase, and additional bedrooms. Early East Coast examples (c. 1830–50) have the main entry on the upright portion of the house.

How do you plan a house plan? ›

House Plans Tips
  1. Make sure all rooms face the right direction according to the Sun path, privacy, and best lot views. ...
  2. Keep an open floor plan with a kitchen on the side. ...
  3. Kitchen layout. ...
  4. Higher ceiling in the living room – add clerestory windows. ...
  5. Protect house indoor air from garage pollution.

How much does an architect charge to draw house plans? ›

Architect fees are 5% to 20% of construction costs for residential projects (custom homes, remodels, extensions) and 3% to 12% for commercial structures. The average cost to hire an architect is $5,000 to $60,000 to design house plans. Architects charge hourly rates of $100 to $250 to draw plans.

What type of house plan is the cheapest to build? ›

A ranch-style house is generally more affordable to build because it has an easy, open floor plan and is traditionally available in a rectangular or U-shaped layout. Many have a dedicated patio space for homeowners to enjoy or easy outdoor access. Maintenance usually costs less for a ranch-style house as well.

What does f mean on a floor plan? ›

F or FURN – Furnace. FPL – Fireplace. KIT – Kitchen. KS – Knee Space. LN – Linen Closet.

What does WD mean in a house plan? ›

W/D – Washer and Dryer (if shown together as with the floor plan above, that indicated the appliances are stacked)

What does C mean in a floor plan? ›

Your floor plans will measure items in both millimetres and brick courses (this gets abbreviated to “c”). One brick course is 86mm as it includes both a standard 76mm brick and 10mm of mortar.

What is the most efficient house floor plan? ›

Simple, straight lines are not only pleasing to look at, but they are also incredibly cost-effective. Keep roof lines simple and side and rear walls straight for an elegantly modern exterior with great curb appeal. Opting for a cozy floor plan with a modern footprint is a great way to keep your home cost-efficient.

How much should you spend on house plans? ›

The average cost of drafting house plans is $700 to $1,500 for pre-drawn plans and $2,000 to $10,000 for custom house plans. Residential drafting fees and blueprints cost $0.35 to $5.00 per square foot. Drafting services charge $30 to $120 per hour.

Why do you have to pay for house plans? ›

The most important reason you need an official set of house plans is that most cities require that you provide a set of plans in order to obtain a permit. Building without a permit can be dangerous and costly due to fines. If you want to make this process easier you will need to purchase an official house plan set.

Is it really cheaper to build a house? ›

Overall, it's cheaper to build a home than to buy one in California, with 13 out of the 20 counties saving you money if you decide to build your house from scratch. Budget-wise, building is more favorable in Southern California whereas Central California caters best to those interested in buying.

How much does it cost to get plans drawn up? ›

As a basic rule of thumb for private residential projects, a residential architect typically charges between 10-15% of the construction cost for full architectural services. This can be reduced to 3.5% – 5.25% if you use your architect for the initial design stage only*.

Top Articles
Latest Posts
Article information

Author: Reed Wilderman

Last Updated:

Views: 5482

Rating: 4.1 / 5 (72 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Reed Wilderman

Birthday: 1992-06-14

Address: 998 Estell Village, Lake Oscarberg, SD 48713-6877

Phone: +21813267449721

Job: Technology Engineer

Hobby: Swimming, Do it yourself, Beekeeping, Lapidary, Cosplaying, Hiking, Graffiti

Introduction: My name is Reed Wilderman, I am a faithful, bright, lucky, adventurous, lively, rich, vast person who loves writing and wants to share my knowledge and understanding with you.